Outside Solvent Based Acrylic is the ultimate solution for those seeking top-tier protection for exterior decorative concrete surfaces. Engineered for both industrial and professional use, this high-quality sealer stands out for its exceptional performance and longevity.
Available in convenient sizes, including both 5-gallon buckets and single-gallon options, this product is designed to cater to various project scales. Its low to medium gloss level adds a refined finish to your concrete while enhancing its overall aesthetic. The dual-action UV protection ensures that vibrant colors remain true, effectively preventing fading even under prolonged sun exposure.
Ideal for a plethora of outdoor applications, Outside Solvent Based Acrylic provides remarkable resistance against salt and chemical intrusion, making it a perfect choice for driveways, pool decks, and any other exterior surfaces prone to wear and degradation. Its ability to resist hot tire pickup ensures that your surfaces maintain their integrity, even under heavy usage.
The superior adhesion capabilities of this sealer create a strong bond with properly prepared concrete, promising a long-lasting protective layer that won’t yellow over time. Whether you're working on residential, commercial, or retail properties, Outside Solvent Based Acrylic delivers unbeatable performance and durability tailored to your needs.
For enhanced safety on slippery surfaces, consider including a non-skid additive during application, particularly for exterior projects. The coverage ranges from 200 to 400 square feet per gallon, ensuring that you can efficiently complete your sealing tasks.
Please note, due to the nature of hazardous materials, this product can only be shipped via ground service and is unavailable for shipping to Hawaii, Alaska, or Puerto Rico. Experience unparalleled protection and aesthetic enhancement with Outside Solvent Based Acrylic – a dependable choice for conscientious contractors and DIY enthusiasts alike.
Click Here for PDF of Technical Data Sheet
Technical Data
Technical Data Sheet (TDS)
Concrete Resurrection - Outside Acrylic CR-561
Concrete Resurrection - Outside Acrylic CR-561 is a high-quality, solvent-based sealer designed for decorative
concrete projects. It is a tough acrylic methacrylate blended polymer that produces coatings with excellent gloss,
stain-resistance and are easy to clean. Adhesion to properly prepared concrete surfaces is excellent and the
material is non-yellowing. Concrete Resurrection - Outside Acrylic CR-561
is fortified with a dual functioning HALS + UV absorber additive for maximum color protection. For next level
protection from salt, chlorine and chemical attack, Concrete Resurrection - Outside Acrylic CR-561
contains a multifunctional silane additive to reject chemical attack and promote adhesion and crosslinking.
Coverage - 200-400 square feet per gallon.
Coverage variations depend on concrete surface porosity and amount of material applied.
Drying Time
Dry to touch: 15-40 minutes
Recoat: 30-40 minutes
Light Foot Traffic: 3 hours
Heavy Traffic: 48-72 hours
Dry times are for 75 degree (F) temperatures and medium humidity. Low temperatures will slow drying and
curing time. Do not apply if rain is expected within 3 - 6 hours.
Physical & Performance Properties – (Testing conducted by independent lab)
Solids Content, by Weight (ASTM D2369)………….28%
Volatile Organic Compounds (non-exempt)……...…398 grams/liter
60 Degree Gloss (ASTM D522)…………….………..98%
Pencil Hardness (ASTM D3363)……………………..4H
Flexibility (ASTM D522)……………………………..>32% elongation
Impact Resistance (ASTM D2794)………………..…40 inch-lb
Abrasion Resistance (ASTM D4060)………..………Wear index = 248
Surface Preparation
Concrete must be clean and free of dirt, dust, oil, grease, mold and mildew, and any other contaminants.
Acid Stained concrete must be neutralized, thoroughly cleaned, and dry prior to sealing. Pigment stained
concrete must be completely cured prior to sealing. All new concrete should be allowed to cure for a minimum
of 28-45 days, or until a pH reading of 10.5 or less is achieved. Concrete must be completely dry prior to sealer
application. It is strongly recommended that a surface probe moisture meter be utilized to verify the surface is
dry. After visually determining the concrete is dry, test a minimum of 10 different areas of the concrete with the
moisture meter. Pay special attention to cracks, control joints, and slab edges.
Application Tools
Pump sprayer, Airless sprayer or Roller & Brush
Preferred Method – Spraying
Protect surroundings with masking paper, masking plastic, or spray shield. Always use a filter when pouring
Concrete Resurrection - Outside Acrylic CR-561 into a sprayer. Use only high quality industrial grade solvent
resistant spray equipment. Concrete surface temperature must be between 50 - 90 degrees (F).
If rolling Concrete Resurrection - Outside Acrylic CR-561 , work material into a wet edge, and avoid excessive
back rolling. When applying two coats, roll the second coat perpendicular to the first.
Clean Up
Tools can be cleaned with Solvent Seal Thinner.
Storage and Shelf Life
Do not allow to freeze. Shelf life of unopened product is approximately one year.
Keep away from heat, sparks & flame. Vapors may cause fire.
Safety
Always use appropriate safety equipment including but not limited to, goggles, face shield, rubber gloves,
chemical resistant clothing or apron, and chemical respirator. For exterior use only.
INHALATION: Vapors may cause dizziness, headaches, or nausea. Immediately move to fresh air. Seek medical
attention.
EYES: Contact with eyes can cause severe burning, irritation, and blurred vision. Flush with water. Seek medical
attention.
SKIN: May cause severe irritation and or chemical burns. Wash with soap and water. Seek medical attention.
Keep out of reach of children.
Use only with adequate ventilation.
Keep away from heat, sparks & flame. Vapors may cause fire. Avoid prolonged contact with skin. Use only with
adequate ventilation. Avoid breathing vapors or spray mist. Do not take internally. If swallowed, do not induce
vomiting. Call physician immediately. Close container after use.
It is the sole responsibility of the property owner or applicator to determine the suitability and safety of applying
this product in areas of pedestrian traffic.
Limitations
This product may only be used on fully cured concrete. Allow a minimum of 28-45 days of cure time after the concrete is poured to allow
ample time for the concrete to completely hydrate.
Do not apply when air or surface temperature exceeds 90 degrees (F) or LAP marking / poor penetration / bubbling may result. Do not
apply to wet or damp concrete, moisture will inhibit penetration of the sealer and cause improper curing, flaking or lifting of the sealer.
Do not apply when it may rain, or if dew may condense on the surface before the sealer has cured. Allow for extended dry times during
cold weather / high humidity.
Prohibitions
Selected state and county jurisdictions prohibit or limit the use of solvent based products. Users should consult local guidelines before
using this product.
Slip and Fall Precautions
OSHA and the American Disabilities Act (ADA) have standards for slip-resistance on pedestrian surfaces. The coefficient of friction
required by ADA is .6 on level surfaces and .8 on ramps. Engrave-A-Crete, Inc recommends the use of slip-resistant additives in all sealers
or coatings that may be exposed to wet, oily or greasy conditions. It is the installer and end users' responsibility to provide a flooring
system that meets current safety standards. Engrave-A-Crete, Inc or its sales agents will not be responsible for injury incurred in a slip and
fall accident.
Warranty
This warranty is made in lieu of all other warranties, either expressed or implied. Before application the User shall determine the
suitability of the product for his/her intended use and User assumes all risks and liabilities whatsoever in connection therewith. Neither
seller nor manufacturer has any knowledge or control concerning the purchaser’s use of this product and no warranty is made as to the
results of any use. The Manufacturer and/or Seller warrants that if any goods supplied prove defective in material the sole obligation shall
be to replace said product. Any claim of defective product must be received in writing within one (1) year from date of shipment. Neither
Manufacturer nor Seller shall assume any liability for injury, loss, or damage resulting from use of this product.
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.