CR-585 Surface Neutralizer is an advanced solution meticulously designed for optimal performance in concrete treatment and maintenance. This concentrated, non-suds formula is an essential companion to the CR-765 Surface Prep & Etch and is ideal after the application of RAC stain.
Crafted from a powerful blend of ammonium hydroxide, CR-585 effectively raises the pH level of concrete surfaces. This crucial adjustment is vital for enhancing the performance of stains and sealers, ensuring they adhere properly and deliver vibrant, lasting results. Unlike standard pH neutralizing agents, CR-585 includes proprietary components that enhance its effectiveness, making it the go-to choice for professionals and DIY enthusiasts alike.
The application of CR-585 is straightforward. Once the CR-765 Surface Prep & Etch has been utilized, and after any staining process, simply apply the Surface Neutralizer to achieve the perfect balance. This step not only prepares the concrete for the next phase of treatment but also ensures that the inherent qualities of the product being used—be it stain or sealant—are fully optimized.
Why settle for mediocre results? With CR-585, users are guaranteed a seamless transition between preparation, staining, and sealing processes. A few moments of application lead to enduring beauty and durability in your concrete surfaces. Regardless of the project at hand, from residential to commercial applications, CR-585 Surface Neutralizer is the professional’s choice for achieving pristine results.
Elevate your concrete treatment process with CR-585, where quality and efficacy meet, ensuring that every project showcases unparalleled excellence and longevity. Experience the difference that a premium surface neutralizer can make in your concrete finishing tasks.
Click Here for PDF of Technical Data Sheet
Technical Data
Technical Data Sheet (TDS) CR-585 Surface Neutralizer
A concentrated and highly effective non-suds pH balancing solution to be used following the
application of CR-765 Surface Etch & Prep and after the application of RAC Stain. CR-585 Surface
Neutralizer is a blend of ammonium hydroxide (a high powered pH increaser) and proprietary
neutralizing agents. It effectively increases the pH level of the concrete surface to insure stain and
sealer performance.
Product Use
Dilution Ratios
In a 5 gallon bucket mix 8 ounces of CR-585 Surface Neutralizer in 5 gallons of clean water.
OR
Using a hose end chemical applicator (commonly used for fertilizer application on lawns) set the
mixing dial to 1.5 ounces per gallon.
Application
Apply the diluted solution to the concrete and spread evenly with a stiff bristle broom. Rinse
thouroghly with clean water then begin the next cleaning process.
If used after CR-765 Surface Etch & Prep:
Interior floor preparation requires the use of a floor machine (buffer) with a black pad, sanding
screen or coatings removal pad.
Exterior concrete preparation requires the use of a pressure washer.
If used after RAC Stain application:
Interior floor preparation requires the use of a floor machine (buffer) with a nylon bristle brush
or white pad.
Exterior concrete preparation requires the use of a pressure washer.
Safety:
Always use appropriate safety equipment including but not limited to, goggles, face shield, rubber
gloves, chemical resistant clothing or apron, and chemical respirator. Do not permit contact with eyes
or skin. Do not breathe vapors, ventilate area during mixing and application. Consult product MSDS
for additional safety information.
Close container immediately after each use. Store upright in a tightly closed container away from
combustible material and sources of heat. Never transfer to an unmarked container. Do not reuse
empty container, empty containers may contain hazardous product residues. Before use, review the
Material Safety Data Sheet for further information, including health effects.
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
