Concrete Stain, Sealer and Coating Application Tools

Shop rollers, sprayers, mixers, squeegees, spiked shoes, and finishing tools for applying concrete stains, sealers, epoxy, polyaspartic, and urethane coatings.

VersaStain 2Qt Sprayer Concrete Stain Applicator for WRC Water Reducible & RAC Acid Stains

$39.95

(5.0)

RAC & WRC Stain Sprayer

$118.95

24 oz. ReCharger Variable Mist Sprayer for TSC and WRC Stains

$114.95

(5.0)

9" Roller Cover 3/8" Nap Shed Free

$3.50

11" Deep‑Well Paint Tray – 4 Quart Capacity

$5.00

(5.0)

Roller Frame 9"

$5.00

18-Inch Notched Floor Coating Squeegee – 8–12 Mil

$16.75

18-Inch Flat Flex Floor Coating Squeegee

$16.75

18-Inch Notched Floor Coating Squeegee – 25-30 WFT Mil

$16.75

18-Inch Magic Trowel – Flexible Coating Smoother

$16.75

Spiked Shoes - Economy

$16.75

Helix Mixer – Quart/Cup or 3–5 Gallon

From $5.95

18" Mohair Roller Cover 1/8" Nap

$10.00

Get better results with application tools selected for concrete stains, acrylic sealers, epoxy, polyaspartic, urethane, and metallic flooring systems. Choose from chemical-resistant sprayers, low-lint roller covers, coating squeegees, mixers, flexible smoothing tools, and spiked shoes for every stage of application.

Use a Flat Flex squeegee for thin films and finishing coats, an 8–12 mil notched squeegee for base coats, or a 25–30 mil version for extended work time metallic epoxy. Complete your setup with the appropriate roller, mixer, tray, and application accessories.

From DIY projects to contractor-grade applications, these essentials make every step of the material application process easier, faster, and more reliable.

Frequently Asked Questions

Which sprayer should I use for stains vs. sealers?

Choose a sprayer rated for the chemistry you're applying, acid stains need non-corrosive parts. Check compatibility before switching between products.

What roller nap works best for sealers?

A shorter nap (around 3/8") gives a smoother, more even coat for most sealers and reduces lap lines.

Do I need different tools for stains and coatings?

Some tools cross over (sprayers, rollers), but always confirm chemical compatibility, especially with acid-based products.

Which squeegee should I use for my floor coating?

Choose the squeegee according to the coating type and required wet film thickness:

Use the Flat Flex Squeegee for thin-film coatings, acrylic sealers, urethane topcoats, and finishing passes.
Use the 8–12 WFT Mil Notched Squeegee for epoxy bond coats and other thinner resinous coatings.
Use the 25–30 WFT Mil Notched Squeegee for Extended Use Time Metallic Epoxy Coat and other high-build applications.

Always confirm the recommended coverage rate and wet film thickness in the coating’s application instructions.