From surface preparation to color and final protection, we make it easier to transform patios, pool decks, walkways, driveways and more.
Clean, porous concrete is the foundation for successful staining and long-lasting exterior results.
Choose the stain system that gives your exterior concrete the color, variation and character you want.
Choose the exterior sealer that matches your surface and stain system. Not every exterior sealer is compatible with stained concrete.
Enter your project size, choose your stain color, select the finish you want and we’ll build an estimated exterior concrete shopping list.
Measure the length and width of your patio, pool deck, walkway, driveway or other exterior concrete surface.
Proper exterior preparation is essential for good stain penetration and long-lasting sealer performance.
These three surface-preparation products are automatically added to every exterior project shopping list.
Select your stain system first, then choose the exact color you want added to your project.
RAC develops naturally varied color unique to each concrete surface. TSC requires acetone purchased locally.
Outside Acrylic is our standard sealer for exterior stained concrete. Choose your preferred finished appearance below.
Matte Additive is added to the second coat of Outside Acrylic. Nature's Essence is offered here only for RAC acid-stained concrete when you want the acid-stain color enriched without making the surface look topically sealed.
Non-Skid can be added when additional surface grip is desired, especially on wet or potentially slippery exterior areas.
Non-Skid is intended for the Outside Acrylic system. Nature's Essence is a penetrating sealer that maintains the natural surface texture.
Select the sprayer you want included for applying your stain.
The ReCharger is not recommended for RAC. If Recommended is selected, VersaStain is chosen for WRC/RAC and ReCharger for TSC.
Add roller tools for your exterior sealer application.
Outside Acrylic can be applied by sprayer or roller. When rolling, work into a wet edge and avoid excessive back rolling.
Your recommended products update automatically as you make selections.
Choose your exterior sealer based on whether your concrete is stained, the finished appearance you want and the type of protection your surface needs.
Our standard recommendation for exterior stained concrete. Outside Acrylic enhances stain color while providing a protective topical finish.
Want the protection of Outside Acrylic without as much shine? Add Matte Additive to the second coat to reduce the finished sheen.
Choose Nature's Essence when you have RAC acid-stained concrete and want to enrich the acid-stain color while keeping a more natural, non-topical appearance.
Weather Dance is designed for natural exterior concrete where you want water repellency without creating a topical film or noticeably changing the surface appearance.
Add Non-Skid to your Outside Acrylic system when additional surface grip is desired. This can be especially useful on pool decks, patios, steps and other exterior surfaces that may become wet.
Transform patios, pool decks, walkways and other exterior concrete with color and protection. Follow these basic steps for a beautiful, long-lasting finish.
Start with clean, porous concrete.
Thoroughly clean the concrete and remove dirt, grease, contaminants and anything that could prevent the stain from penetrating. The surface must be clean and porous before staining.
Add the color and character you want.
Apply WRC, RAC or TSC according to the product's Technical Data Sheet. Apply evenly and avoid puddling. Application methods, dilution and coat recommendations vary by stain system.
Complete the stain process before sealing.
Allow the stain to fully dry or complete its reaction before sealing. Follow the specific cleanup requirements for the stain you selected and make sure the concrete is clean and ready for sealer.
Protect and finish your exterior concrete.
For most WRC, RAC and TSC exterior stained projects, finish with Outside Acrylic to enhance the color and provide a protective topical sealer.
Please review the Technical Data Sheet for every product used in your project. Technical Data Sheets include surface-preparation requirements, mixing or dilution instructions, coverage rates, application methods, drying times, recoat windows and safety information.
This section is a general exterior concrete project overview only. Weather, temperature, humidity, concrete condition and porosity can affect stain and sealer performance. Always follow the current product label and Technical Data Sheet for the specific Concrete Resurrection products used on your project.
