Outside Solvent Based Acrylic 400 VOC - Multiple Sizes Available
Outside Solvent Based Acrylic is the ultimate solution for those seeking top-tier protection for exterior decorative concrete surfaces. Engineered for both industrial and professional use, this high-quality sealer stands out for its exceptional performance and longevity.
Available in convenient single-gallon jugs, this product is designed to cater to various project scales. Its low to medium gloss level adds a refined finish to your concrete while enhancing its overall aesthetic. The dual-action UV protection ensures that vibrant colors remain true, effectively preventing fading even under prolonged sun exposure.
Ideal for a plethora of outdoor applications, Outside Solvent Based Acrylic provides remarkable resistance against salt and chemical intrusion, making it a perfect choice for driveways, pool decks, and any other exterior surfaces prone to wear and degradation. Its ability to resist hot tire pickup ensures that your surfaces maintain their integrity, even under heavy usage.
The superior adhesion capabilities of this sealer create a strong bond with properly prepared concrete, promising a long-lasting protective layer that won’t yellow over time. Whether you're working on residential, commercial, or retail properties, Outside Solvent Based Acrylic delivers unbeatable performance and durability tailored to your needs.
For enhanced safety on slippery surfaces, consider including a non-skid additive during application, particularly for exterior projects.
Please note, due to the nature of hazardous materials, this product can only be shipped via ground service and is unavailable for shipping to Hawaii, Alaska, or Puerto Rico.
Choose options
Need help?
Frequently Asked Questions
Use the coverage calculator on this page for the most accurate estimate. As a general guideline, most stains and sealers cover 200–400 sq ft per gallon.
Coverage can vary based on surface texture, concrete temperature, and ambient conditions, so your actual usage may differ slightly.
Proper surface preparation is essential for achieving consistent color and long‑lasting results. At minimum, all concrete must be clean and free of dirt, dust, oil, grease, mold, mildew, and any other contaminants.
RAC Stain:
Concrete stained with RAC must be neutralized, thoroughly cleaned, and completely dry before sealing.
WRC & TSC / Active Elements Stain:
Concrete must be fully cured prior to sealing.
If you want, I can expand this into a full multi‑step prep guide or match it to your brand’s tone across the rest of your FAQs.
You can apply Outside Acrylic using a pump sprayer, airless sprayer, or roller and brush. Spraying is the preferred method for the most even, professional finish.
Spraying (Preferred Method)
- Protect surrounding areas with masking paper, plastic, or a spray shield.
- Always pour through a filter to keep debris out of the sprayer.
- Use high‑quality, industrial‑grade solvent‑resistant spray equipment.
- Ensure the concrete surface temperature is between 50–90°F during application.
Rolling
If you choose to roll Concrete Resurrection Outside Acrylic CR‑561:
- Maintain a wet edge and avoid excessive back‑rolling.
- For two‑coat applications, roll the second coat perpendicular to the first for uniform coverage.
Dry times can vary, but here are the typical benchmarks:
- Dry to touch: 15–40 minutes
- Ready for recoat: 30–40 minutes
- Light foot traffic: ~3 hours
- Heavy traffic: 48–72 hours
These times are based on 75°F temperatures and medium humidity. Cooler weather or high humidity will slow both drying and curing.
Important: Do not apply if rain is expected within 3–6 hours, as moisture can interfere with proper film formation.
