From prep to final protection, we make it easy to get professional results.
A clean, properly prepared surface is the key to a beautiful, long-lasting finish.
Three unique stain options. Choose the look and application style that fits your project.
Choose the right interior sealer for the durability, appearance and performance you need.
Choose the stain system that best matches the look, application style and level of color control you want for your interior floor.
Choose WRC when you want predictable color, a broad color selection and control over how light or rich the finished color appears. Can be diluted further for a softer, more translucent look.
Choose RAC when you want the organic movement and natural variation of a traditional acid-stained concrete floor. Every floor develops its own unique color and character. For a more diluted, translucent look, mix 2 parts water to 1 part stain.
Choose TSC when you want fast-drying translucent color that can be layered, blended or diluted further with 3x acetone (3 parts acetone to 1 part stain) for a softer, more subtle look.
Enter your floor size, choose your preparation, stain color, dilution, sealer and application tools, and we’ll build your estimated shopping list.
Measure the length and width of the concrete area.
Choose what your floor needs before staining.
CR-765 automatically adds CR-585 Neutralizer. CR-590 automatically adds CR-580 Degreaser.
Select the stain system first, then choose the exact color and dilution you want.
Diluting RAC can create a lighter appearance. Because RAC chemically reacts with the concrete, every floor will develop unique color and variation.
TSC may be diluted with acetone for a softer, more subtle and translucent appearance. Acetone is purchased locally.
RAC automatically adds CR-585 Surface Neutralizer. TSC requires acetone purchased locally.
Select the protective sealer and finished sheen you want for your stained floor.
Choose CR-515 for an acrylic finish, CR-545 for a matte urethane finish, or CR-546 for a high-gloss urethane finish.
A renewable interior floor finish is included with every completed project.
Estimated at 1,000 sq. ft. per gallon per coat. Floor finish should be applied only after the sealer has fully cured according to its instructions.
Select the sprayer you want included for applying your stain.
The ReCharger is not recommended for RAC. If Recommended is selected, the calculator chooses VersaStain for WRC/RAC and ReCharger for TSC.
Add the roller tools needed to apply your interior sealer.
CR-515 calls for a high-quality 3/8" nap lint-free roller cover. CR-545 and CR-546 may be applied with a shedless roller cover appropriate for the product instructions.
This list updates automatically as you make selections.
Choose your interior sealer based on the appearance, traffic level and degree of protection your floor needs.
A straightforward water-based acrylic option for decorative residential concrete floors with standard foot traffic.
Choose CR-546 when you want greater wear resistance and a high-gloss finish for an interior floor.
Choose CR-545 when you want increased abrasion and chemical resistance with a low-sheen matte appearance.
Consider polyaspartic for demanding interior floors where higher-performance protection and rapid cure are priorities.
CR-520 Floor Finish or CR-520M Matte Floor Finish can be applied over a properly cured interior sealer to provide a renewable wear layer. When high-traffic areas begin to look dull, the floor finish can be refreshed without resealing the entire floor.
Professional results are within reach. Follow these basic steps for a beautiful, long-lasting interior concrete floor.
Start with clean, porous concrete.
Remove dirt, grease, coatings and other contaminants. The concrete must be clean and porous before staining.
Apply your chosen stain system.
Apply WRC, RAC or TSC according to that product's Technical Data Sheet. Application methods and coat recommendations vary by stain type.
Let the stain complete its process.
Drying, reaction and cleanup requirements vary by stain type and jobsite conditions. Follow the Technical Data Sheet before sealing.
Protect the color and finished floor.
Apply a compatible interior sealer according to the product instructions to protect the stain and provide the desired finish.
Please review the Technical Data Sheet for every product used in your project. Technical Data Sheets include surface-preparation requirements, mixing or dilution instructions, coverage rates, application methods, drying times and safety information.
This section is a general project overview only. Always follow the current product label and Technical Data Sheet for the specific Concrete Resurrection products used on your project.
